Since I had just finished my
Linda's Blog post on all the pine cone wreath I had made over twenty years ago I thought you might enjoy a step-by-step "How-to" on how to make one of your own. If you'd like to read my post entitled "
My Favorite Pinecone Wreath - I Just Had To Make One" please
CLICK HERE.
My instructions on how to make a pinecone wreath of your own are shown below.
I also created a .PDF "Linda's How-Do-I Series How To Make A Pinecone Wreath" e-book for this as well.
If you'd like to download my free e-book please
CLICK HERE for the
"How To Make A Pinecone Wreath" e-book page of my
Linda Walsh Originals E-Patterns website. Here you can also download my free e-book and and view all of our e-patterns and e-books.
How To Make A Pine Cone Wreath
Supplies Needed1 Oasis Foam Ring - 8 1/2"
1 Can Spray Varnish
Pinecones - 2 Packages Natural Small Pinecones
White Tipped Pinecones - 1 Package
Dark Green Preserved Eucalyptus - 1 - 2 Packages
Dried Floral Berries - Teal Colored - 1 - 2 Packages
1/2" Red Holly Berry Head Wire Stems - 1 to 2 Packages
Floral Picks - 1 to 2 Packages
Dual Temperature Glue Gun
Glue Gun and Glue Sticks
Medium Gauge Wire
Wire Cutters
Instructions(Note - These instructions are for
ADULT use only as they require the use of a hot glue gun. Always use caution when working with any kind of hot glue gun.)
1. Lay the white tipped pinecones out single file in a circle. Make sure you have enough pinecones to snugly fill the center of the 8 1/2" oasis foam ring.
2. Lay the natural small pinecones out single file on their sides within the circle of white tipped pinecones. Make sure you have enough pinecones to snugly fill the inner circle of the 8 1/2" oasis foam ring.
3. Lay the natural small pinecones out single file on their sides along the outer circle of the white tipped pinecones. Make sure you have enough pinecones to snugly fill the outer circle of the 8 1/2" oasis foam ring.
4. Cut a long piece on the medium gauge wire and fold it in half and then form a 1" loop. Twist the wire around itself to hold the loop and then tightly wrap the wire around the top center back of the oasis foam ring. Twist the ends to secure it. This will form the loop to hold the wreath to the wall.
5. Starting with the white tipped pinecones wrap a floral pick around the bottom of one of the pinecones and then insert it into the center of the foam. You may need to trim the wood pick slightly with the wire cutters if it is too long. Then using the low temperature setting of the dual temperature glue gun glue the pinecone to the foam to hold it.
6. Wrap a floral pick around the bottom of the second white tipped pinecone and then position it snugly against the 1st pinecone and in the center of the foam ring. You may need to trim the wood pick slightly with the wire cutters if it is too long. Then using the low temperature setting of the dual temperature glue gun glue the pinecone to the foam (if need be) and to the 1st pinecone to hold it.
7. Continue in this manner until you have filled the the center of the foam ring with a singular row of white tipped pinecones - snuggly fit.
8. For the inner circle wrap a floral pick around the bottom of one of the natural small pinecones and then insert it on its side into the inner center of the foam ring. It should be snuggly positioned against the inner side of the white tipped pinecone. You may need to trim the wood pick slightly with the wire cutters if it is too long. Then using the low temperature setting of the dual temperature glue gun glue the pinecone to the inner center of the foam to hold it.
9. Wrap a floral pick around the bottom of the second natural small pinecone and then position it on its side snugly against the 1st pinecone in the inner circle of the foam ring and snuggly against the inner side of the white tipped pinecone. You may need to trim the wood pick slightly with the wire cutters if it is too long. Then using the low temperature setting of the dual temperature glue gun glue the pinecone to the foam (if need be). Then using the low temperature setting of the dual temperature glue gun glue it to the natural small pinecone on its side in the inner circle, and to the side of the white tipped pinecone to hold it.
10. Continue in this manner until you have filled the the inner circle of the foam ring with a singular row of natural small pinecones - snuggly fit.
11. For the outer circle wrap a floral pick around the bottom of one of the natural small pinecones and then insert it on its side into the outer circle of the foam ring. It should be snuggly positioned against the outer side of the white tipped pinecone. You may need to trim the wood pick slightly with the wire cutters if it is too long. Then using the low temperature setting of the dual temperature glue gun glue the pinecone to the outer circle of the foam to hold it.
12. Wrap a floral pick around the bottom of the second natural small pinecone and then position it on its side snugly against the 1st pinecone in the outer circle of the foam ring and snuggly against the outer side of the white tipped pinecone. You may need to trim the wood pick slightly with the wire cutters if it is too long. Then using the low temperature setting of the dual temperature glue gun glue the pinecone to the foam (if need be). Then using the low temperature setting of the dual temperature glue gun glue it to the natural small pinecone on its side in the outer circle, and to the outer side of the white tipped pinecone to hold it.
13. Continue in this manner until you have filled the the outer circle of the foam ring with a singular row of natural small pinecones - snuggly fit.
14. Cut the eucalyptus into many, many 3" - 4" sections with the wire cutters. Insert the preserved eucalyptus in between all the pinecones and using the low temperature setting of the dual temperature glue gun glue it to the pinecones. Continue in this manner until the wreath has been filled and the eucalyptus placement is pleasing to the eye.
15. Cut the dried floral berries into many, many 3" - 4" sections. Insert the dried floral berries in between all the pinecones and and eucalyptus until the placement is pleasing to the eye. Then using the low temperature setting of the dual temperature glue gun glue it to hold it in place.
16. Fold many, many of the red holly berry wire stems in half and then insert them in between the pinecones, eucalyptus, and dried floral berries until the placement is pleasing to the eye. If need be, using the low temperature setting of the dual temperature glue gun glue it to hold it in place.
17. Spray the whole wreath with varnish.
18. Congratulations - You're Done!
Please respect Linda's Terms of Use: All patterns, e-patterns, e-books, tutorials, how-to's, and e-products © 2004-2010 Linda Walsh Originals-Designs by Linda Walsh. All rights reserved, including downloading, mass producing, photocopying, enlargements, reductions,and all other forms of reproduction, website sharing, Email, RSS feeds, or any other means of redistribution. Commercial selling or reselling by any means, including eBay or any other website by permission only.
Products made from Linda Walsh Originals patterns, e-patterns, e-books, tutorials, how-to's, and e-products are intended for personal use for fun or small scale personal and business profit as long as you credit us with the design. Large scale commercial use (i.e. mass production) including wholesale distribution, catalog sales, and all other forms of large scale commercial production are by permission only. Items made from Linda Walsh Originals patterns, e-patterns, e-books, tutorials, how-to's, and e-products are intended for decoration only and are not intended for use by children. Not responsible for human error, individual workmanship, or printing errors in the E-books, E-products, tutorials, how-to's, patterns or the E-Patterns. Copyright © 2010 - All Rights Reserved - Written By Linda Walsh of
Linda Walsh Originals,
Linda Walsh Originals E-Patterns, and
Linda's Blog. Linda is a doll maker and doll pattern designer.
http://lindawalshoriginals.com/
With Multiple Berries or 
ones of Various Shapes and Sizes